Participants

Continental
is one of the leading automotive suppliers worldwide, offering brake systems, systems and components for powertrains and chassis, instrumentation, infotainment solutions, vehicle electronics, tires, and technical elastomers. The company contributes to enhanced driving safety and global climate protection, and is also an expert partner in networked automobile communication.
Hella
is one of the largest German industrial companies and an important automotive supplier worldwide. The company develops and manufactures lighting technology and electronics for the automobile industry and has one of the largest aftermarket organizations for vehicle parts, accessories, diagnostics and service in Europe.
Takata
is an automotive parts company based in Japan. The company has production facilities on four continents, with its European headquarters located in Germany, where it also has nine production facilities. Takata makes seat belts, air bags, and other products that help to keep people safe. Most of the components Takata produces cannot be seen. They are based on sophisticated technologies and in the event of an emergency, they go into action in less time than it takes to blink an eye to help keep automobile passengers safe.
Stabilus
is a world market leader in gas struts and hydraulic vibration dampers, with expertise in linkage systems: automobile and furniture industries, housing and building technology and medical products as well as rehabilitation technology. The company gas struts, dampers, and electric drives allow to optimize opening, closing, lifting, lowering, damping, and adjusting actions.
Huf
is present in 14 countries worldwide with production and/or development facilities for the automotive industry. The company develops and produces mechanical and electronic key systems, lock sets, steering locks, remote control systems, telematic and tire pressure monitoring systems.
ZES Zollner Electronic
The electronics contract manufacturer Zollner develops and produces individual parts, modules, devices as well as complex systems for customers in different industry sectors such as automotive, office electronics and data systems technology, industrial electronics, aviation, measurement, medical systems, telecommunications and other consumer goods.
TE Connectivity
is a world leader in connectivity, which designs and manufactures solutions that connect and protect data and power. The company operates in more than 150 countries in a variety of industries including automotive, data communication systems, consumer electronics, telecommunications, aerospace, defense and marine, medical, energy, and lighting.
Mitsubishi Electric
With a history of over 35 years, Mitsubishi Electric Company is a global leader in the research, manufacturing and marketing of electrical and electronic equipment used in communications, consumer electronics, industrial technology, energy and transportation.
Edorom Metal
Component of DEKEM group with two other companies located in two powerful industrialized areas of France, Edorom Metal Romania provides metal products obtained by cold plastic deformation (stamping,cutting, drawing). We have automatic presses (from 40 to 250 T) and we work with progressive tools mainly (bending and assembly too). Raw materials have thickness: 0,3 to 4 mm (steel, stainless steel, copper, bras, galvanized steel etc).
Jacquemet
is a subsidiary of Jacquemet Group, which is specialized in metal assemblies and springs since 1926, offering a global solution for wire metal strips and tube conversion through processing and manufacturing wire springs of all types: torsion, compression, traction and flat.
Anorom
Anorom Company is specialized in the treatment of aluminium and aluminium surfaces. The surface treatments which Anorom performs are suitable both for the bright pieces of a laminated material and for the cast pieces.
Lucefin
Lucefin Group is one of the largest manufacturers specializing in the production of cold drawn steel bars round / square / hexagon / special and peeled bars . We produce drawn bars round profile from 5 to 80mm, hexagon from 4 to 100mm, plates from 2x6 to 80x400mm, square from 3x3 to 100x100mm and peeled bars 30-140mm carbon steel, alloy steel and stainless steel. In our 4 production units and 10 commercial units annually we produce and sell approximately 220,000 tons of steel worldwide. Our products are used in production of parts for different machines or industries.
Hofag Engineering
provides complete design services for the engineering development and design community. With a team of highly skilled engineers and designers, equipped with the latest software and hardware systems, the company offers services like concept design, assembly modeling, assembly drawings, solid modeling and detailing drafting. Either complementary or full service, Hofag's design solutions are meant to ensure their clients’ projects are completed on time.
Euro Sandow
is one of the leading producers for custom made elastic nets, shock cords, bungee cords, elastic straps, luggage and floor nets for a wide variety of securing applications. Most of the products are designed for the automotive industry as a 2nd tear supplier.
Delta Rom Technologies
is part of Delta Composants, Delta International Corporation and AMTE (Auge Group) which produce connections for diodes, airbag electrodes, circuit breaker axis, metallic wires and strips, wire harnesses and stamping parts.
DS Smith
as a leading provider of corrugated packaging in Europe and of specialist plastic packaging worldwide, the company operates across 25 countries. DS Smith, Plastics division is an over 30-year manufacturer of flexible packaging, filling equipment, dispensers and temperature controlled packaging worldwide, and rigid packaging returnables in Europe.
E-Cablaje
is one of the main Romanian producers of electrical cables, control cables, brake and clutch, for motor vehicle, cords and leads, insulated, electric, with moulded-on plugs, cable assemblies, wiring harnesses/looms and cable connector assemblies.
PQ Plast
is a production subsidiary of Gentner GmbH/Nürnberg/Germany - a family owned company producing plastic parts for automotive. PQ Plast/Arad, founded in 2011, is based on following departments: 100% automatized injection molding, automatized & manual assembly lines, leathering, glueing, wrapping. We produce parts & components for interior, safety, etc.
DC Technology
DC Technology offers a wide range of innovative and cost saving equipment for the industry. The company range of products and services includes equipment, measuring and control devices that have multiple applications for automotive industries, railway, constructions, heavy industrial, home appliances, renewable energy and other industries.
Rosler
For more than 80 years, Rösler has been offering an extensive portfolio in the world of mass finishing systems, shot blasting, consumables and services. Rösler is the world's only provider of surface treatment services, the two essential technologies - vibrating and sanding - in combination with industrial washing equipment, also creating and producing all the components.
Trigo Industry Services
TRIGO provides a comprehensive range of corrective and preventive quality inspection and management services. This complete portfolio enables TRIGO to implement quality solutions especially tailored to customers’ needs.
Poppelmann
is an industrial producer of plastic protective elements and other technical parts made out of plastic. Since 1949, the family-owned company, with its five production sites and 550 injection moulding machines, thermoforming lines and extruders, has grown into a leading manufacturer in the plastics processing industry. Pöppelmann has over 2,000 highly-qualified employees and customers in over 90 countries.
Bollhoff
A family based company, since 1877, specialized in fasteners and thread technology. Producer of thread technology and worldwide supplier for various companies. About 60% of the turnover worldwide is done with the automotive sector. The company has R&D department and offers technical and logistic support to the customer.
Asined Automotive
Asined Automotive is manufacturer of textile packaging and plastic items for automotive industry. We are supplier of accessories for Dacia Renault since 1991. Asined Automotive can help you to find a solution for more type of activities: textile packaging for appearance parts – fast samples, laser cutting on textile material with technological signs, plastics with textile inserts /organic leather, plastic parts injection.
Plastor
Plastor have a strong tradition in plastics processing by mold injection and blow molding as well as in molds design and manufacturing. We manufacture automotive, electronics or medical components from a large variety of engineering plastics. The customers are famous names in industry, e.g. Bosch, Magna, Dacia, etc. Production also includes the manufacturing of winter sport equipment for the well-known Salomon and Atomic.
Inmaacro
Inmaacro is the technical and commercial representative of companies from Germany, Switzerland, Holland, Italy and Taiwan which are producers of machine tools, measuring and control machines, cutting tools, accessories and software.Also, the company manufactures custom made tools, custom made clamping devices for machine tools and coordinate measuring machines, molds, precision parts, automation.
Kunplast-Karsai
Kunplast-Karsai Plc. is one of the most significant corporations of the Hungarian plastic processing industry certified according to IATF 16949, ISO 9001 and ISO 14001. Our main activities are automotive part production by thermoplastic injection (on machines ranging from 25t to 3000t clamping force), and manufacturing electric industry products by thermoset compression (press machines from 160t to 1000t clamping force) and by thermoset injection.
Mold-Masters Europa
Mold-Masters is the global leader in melt delivery and control systems. Since 1963, the company designs and manufactures the plastic industry’s’ most advanced hot runner systems, temperature controllers and auxiliary equipment. With manufacturing and sales facilities in the Americas, Europe, India and Asia, Mold-Masters spans the globe with its capabilities. Mold-Masters is a proud member of the Milacron family of brands.
META Sisteme de rafturi
META Sisteme de Rafturi SRL products are CLIP and FIX shelving systems, MINI-RACK and SPEED-RACK widespan racks, MULTIPAL pallet rack, Cantiliever, Multitier and Multipurpose shelving systems. We have been involved in metal working processes for more than 120 years, with our "Made in Germany" quality seal, we don't just want to recruit people, we also feel it is a duty and a requirement to provide you with quality products, now and in the future.
Cobotec Engineering
Cobotec Engineering "The Cutting Specialist" is a company with a long experience in the Romanian industry, distributing exclusive production equipment, industrial tools and professional accessories from the best manufacturers in the industry. Our product portfolio contains: cutting tools, band saw blades, circular saw blades, sawing machines, complete machining lines, presetting machines, measurement tools, storage systems, hand tools and other.
Podemcrane
Podemcrane AD is the biggest crane components manufacturer in CEE and has remained at the forefront of technological developments in the industry. 30 000 sq.m high-tech production factory with modern equipment located in EU. Sales of hundred standard products in more than 55 markets. Mani products: wire Rope Hoists and trolleys, end carriages, motor reducers (crane drives), chain hoists, special solutions.

Other participants will be added upon registration